May 20, 2004 : Continuing to Fillet the Bulkheads - Well, I spent the winter enjoying other activities. Unfortunately, I've waited for the temperature to hit 90 degrees before starting back to work. The daily drill in the heat of summer is to set the alarm for 6:00 a.m., get up, feed and walk the dogs, grab a bite, and head out to the shop for a couple of hours of work. Today I put an epoxy fillet on the motor bracket bulkhead.
Slathering on the first joint with a paint stick.
Using my auto body applicator to smooth out the fillets. (I should have been using my paper sleeves and put them on for the next application).
The finished fillet. More to follow.